Explanation

CABLE STRUCTURE

1- CONDUCTOR        : IEC 60228 class 2 or class 5 tinned or bare copper

2- INSULATION         : IEC 60092-351 cross-liked polyethylene (XLPE) 

3- TWIST                   : Cores laid up in pair,pairs laid up concentrically.

4- INNER SHEAT       : Seperating foil or halogen-free bedding compound on request. 

5- SCREEN                 : Tinned copper or annealed copper wire braided screen (min. 90%0ff) 

6- SHEATH                : IEC 60092-359 HFFR compounnd 

    SHEATH COLOUR :  RAL 9005 black or RAL 7001 gray

PRODUCTION AND TEST STANDARDS

CONSTRUCTION                     : IEC 60092/375-376

TESTS AND MATERIAL            : IEC 60092/350-351-359

FLAME RETARDATION            : IEC 60332/1, IEC 60332 / 3 Cat A

HALOGEN                               : IEC 60754/1-2

WORKING TEMPERATURE      : -40°C /+ 90°C

 MIN. BENDING RADIUS (FIXED)  : 8 X (Overall Diameter) 

RATED VOLTAGE                    : 60/250 V

TEST VOLTAGE                       : 1,5 kV

APLICATION: Used as control and communication cables in radio,radar and information systems of Marine vehicles. Its'twisted pairs enables proper transmission of high frequency signals, while its' overall screen minimizesenvireonmental electromagnetic interference.

ENVIRONMENT: Usable at all conditions in Marine environment such as dry wet or oily locations, inside the engine room, where electromagneticprotection isrequired as well.

SAFETY: Due to its' halogen-free low smoke density and flame retardant features, it wan't create corrosive gases nor abstruct visibility and prevents the fire from spreading around.Thus it protects human life and equipment, during a fire.